There are a wide variety of pharmaceutical powder mixer, various mixing machine loading rate is also different, according to different operating principle, can be divided into the following types:
1, rotary body material pharmaceutical: there are three - dimensional mixer, two - dimensional dry powder mixer, double - cone dry powder mixer, V - type dry powder mixer, mixing machine, etc.. This kind of dry powder mixing machine is the movement of the material barrel revolving body, and the material is formed by the rotation of the material,. It is purely the use of space to achieve the purpose of mixing, so the rotary drum type dry powder mixing machine loading rate is limited, it is necessary to set aside a certain space to achieve the convection, the loading rate is not easy to exceed 40%, the optimal loading rate in 50% - 45% most appropriate.
2, fixed material bucket type pharmacy mixer: the market is a common type of trough type mixer, single cone mixer, double helix, no gravity, etc. are fixed feeding tube alone by mixing blade mixing material. The loading rate of the hybrid machine is less than 60%, the optimal loading rate is 40%-60%. But the biggest disadvantage of this kind of dry powder mixer is that the bottom part of the material can not be involved in the mixing, there is a dead end, can not meet the high requirements of high uniformity of the mixture.
3, double motion pharmacy mixer which JINHE company created an advanced and new hybrid concept. - Double hybrid motion superposition. The content is to allow the material container to carry out the space movement to make its internal material mixed with each other, while the full size of the rotating blade with different movement direction and different speed of the material mixed. Our design guidelines are: to make the new hybrid machine on the basis of no material dead, greatly improve the mixing efficiency. Both overcome the shortcomings of the current market, but also its variety of advantages on the new hybrid machine, and these advantages to carry forward. The loading rate of this kind of hybrid machine is not easy to be lower than 30%. The optimal loading rate of 60%-80%. is lower than that of the conventional mixer. The loading rate is lower, but the loading rate is too low.
The best loading rate of pharmaceutical mixer should be determined according to the selection of equipment, according to your request, we should choose the most suitable dry powder mixer!
